Loading... Please wait...
  • Porsche 997.2 C2/C2S/C4/C4S/GTS NHP Exhaust Mufflers with Sound Valves
  • Porsche 997.2 C2/C2S/C4/C4S/GTS NHP Exhaust Mufflers with Sound Valves
  • Porsche 997.2 C2/C2S/C4/C4S/GTS NHP Exhaust Mufflers with Sound Valves
  • Porsche 997.2 C2/C2S/C4/C4S/GTS NHP Exhaust Mufflers with Sound Valves
  • Porsche 997.2 C2/C2S/C4/C4S/GTS NHP Exhaust Mufflers with Sound Valves
  • Porsche 997.2 C2/C2S/C4/C4S/GTS NHP Exhaust Mufflers with Sound Valves
  • Porsche 997.2 C2/C2S/C4/C4S/GTS NHP Exhaust Mufflers with Sound Valves

Porsche 997.2 C2/C2S/C4/C4S/GTS Exhaust Mufflers with Sound Valves

$1,700.00

Product Description

Get the sound the 997.2 Deserves, the factory exhaust just doesn't cut it on the DFI engine, these NHP Mufflers with Valves will certainly improve the exhaust note on your 997.2

PRODUCT FITMENT: 09-12 Porsche 997.2 All Models except for Turbo and GT3 

 

If you want the best mufflers for your 997.2 look no further. This Exhaust has designed mufflers with sound valves for the Porsche 997.2 Carrera , these are by far the highest quality mufflers available for your 997.2 on the market today, from the quality of construction, materials and sound they produce these are the best period, stop searching and comparing there is no comparison. With a simple push of a button these will give you the aggressive sport sound you're Porsche deserves with another push of a button you will get a much better sounding exhaust compared to the factory exhaust but more of a low key sports car, you get the best of both worlds. These mufflers will install using the factory muffler supports, no modification is needed to install these. We have built these with the finest 304 Stainless Steel, superb high quality welds, ribbed sheet of stainless steel for the muffler can which makes them indestructible. The sound is controlled via a FOB remote or can be controlled by a switch, both methods will work (see "about installation" below) These muffler include the necessary installation kit to control the sound valves, this kit is made up of control module with electrical wiring, remote control, vacuum solenoid, vacuum line and vacuum hardware (connecting T's). Please see "about installation" below.

You can purchase the mufflers alone and re-use your factory tips or you can purchase them as a package with our exhaust tips available in Chrome, Black Chrome and Matte Black Finish.

About installation

FOB Remote. The easiest and quickest way is to use the FOB remote to control the valves, this means that you don't need to make any holes anywhere to mount a switch on the dashboard area and this also means that you don't need to get electrical wiring from the dashboard area all the way to the engine bay compartment. Approx time of installation 3 Hours for a complete installation including switch kit and the mufflers.


When you choose to install the FOB Remote kit the exhaust system will be on the open valve by default when you start up the car, you must press the remote to shut the valves. 

Dashboard mounted switch. The muffler valves can also be controlled with a simple on/off switch that can be installed pretty much anywhere where it makes sense to you, that can be on the trim underneath the handbrake, the center console, on the steering wheel trim, on the side of the seat etc... in other words where you want it to be. This would be type of on/off switch that you will control by either putting the switch to OFF or ON mode. This installation requires electrical wiring to be routed from the dashboard area to the engine bay, for a clean job the necessary trims will have to be removed so that no wires can be seen. Approx time of installation 3-4 Hours for a complete installation of switch kit and mufflers. 

$1,700.00

Quantity: